For general tapping of bottom holes. The right-hand twisted spiral flutes feed the swarf out of the hole. Helix pitch 40°. Taper lead 2 threads.
| Produktnamn | Thread system | Type of slot | Direction | Pitch | Handle square | Thread length | Bevel length | Tool material | Thread designation | Total length | Shank diameter | Quantity in pack | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TAP M6 SPIRAL 40GR23820400 |
M Coarse thread | Spiral cut | Right | 1mm | 5mm | 14mm | No. 3 | High-speed steel | M 6 | 66mm | 6,3mm | 1 |
|
|
TAP M5 SPIRAL 40GR23820301 |
M Coarse thread | Spiral cut | Right | 0.8mm | 4mm | 12mm | No. 3 | High-speed steel | M 5 | 58mm | 5mm | 1 |
|
|
TAP M4 SPIRAL 40GR23820202 |
M Coarse thread | Spiral cut | Right | 0.7mm | 3.15mm | 17mm | No. 3 | High-speed steel | M 4 | 53mm | 4mm | 1 |
|
|
TAP M8 SPIRAL 40GR23820509 |
M Coarse thread | Spiral cut | Right | 1.25mm | 6.3mm | 18mm | No. 3 | High-speed steel | M 8 | 72mm | 8mm | 1 |
|
|
TAP M3 SPIRAL 40GR23820103 |
M Coarse thread | Spiral cut | Right | 0.5mm | 2.5mm | 14.5mm | No. 3 | High-speed steel | M 3 | 48mm | 3,15mm | 1 |
|
|
TAP M10 SPIRAL 40GR23820608 |
M Coarse thread | Spiral cut | Right | 1.5mm | 8mm | 20mm | No. 3 | High-speed steel | M 10 | 80mm | 10mm | 1 |
|
|
TAP M12 SPIRAL 40GR23820707 |
M Coarse thread | Spiral cut | Right | 1.75mm | 7.1mm | 23mm | No. 3 | High-speed steel | M 12 | 89mm | 9mm | 1 |
|
|
TAP M16 SPIRAL 40GR23820806 |
M Coarse thread | Spiral cut | Right | 2mm | 10mm | 25mm | No. 3 | High-speed steel | M 16 | 102mm | 12,5mm | 1 |
